About LM160 Lead Pewter Casting Alloy
Hallmark's LM160 has a melting point of 158 F and can be re-melted multiple times.
This alloy is made of pure tin, bismuth, lead and cadmium. This is not a re-melt or scrap.
This low melting temperature alloy expands as it solidifies. It is easy to machine and tool. They are also good for repairing dies and patterns as well as ideal for creating fusible links and holding irregular and contured parts during maching.
Density .339 lbs./In3 9.4 g/cc
What you get:
The square block is about 1 pound. You will need to put in the total pounds in the quantity box at checkout for your needs.
They are hand poured and we try our to make sure they are close to a 1 pound block. They can run from .95 to 1 pound.
Lead & Cadmium Warning:
THIS METAL CONTAINS LEAD AND CADMIUM.
This product contains lead and cadmium. Precautions must be taken when using this material. Safe handling procedures are a must. Always wash hands and face before eating or smoking. Use in a well-ventilated area. YOU MUST consult the material safety data sheet before using.
This material must be recycled, if not, you must follow state & federal regulations regarding the disposal of lead and cadmium contained products.
1.10000 lbs (approximately)
Safety Data Sheet
SDS LM160.pdf (~266kb)